Water disinfection with chlorine
Drinking water disinfection equipment with Chlorine (sodium hypochlorite) for homes and businesses.
Water chlorination for consumption
Simple and cheap system for Purify and disinfect contaminated water from wells, ditches, rafts, rivers..etc. Affordable prices to chlorinate the water at the inlet of the storage tank and keep it in perfect condition and safe for consumption. All our chlorination equipment has a two-year warranty.
Depending on the desired chlorination of the tank water, you can choose between two systems:
- Continuous chlorination with chlorination panel system
- Initial chlorination with inline chlorination system
If you need our opinion or advice on the most suitable equipment for a particular use of water, do not hesitate to Contact us and we will advise you immediately.
You can also see More information in our online store: www.tiendahidroserver.com
Chlorine water disinfection equipment
Chlorination and pH control system
Pre-assembled panel for automatic control of free chlorine and pH in tanks, with sensors, K800 central unit, flow regulation, sample intake, alarms, and MODBUS communication.
Price list
| REFERENCE | MODEL | PRICE (*) |
|---|---|---|
| IN-2604-04 | Free chlorine (0-5ppm) amperometric sensor (Cu-Pt) and pH panel | 1.875,00€ |
| IN-2604-06 | Free chlorine panel (0-2ppm) potentiostatic sensor (membrane probe) and pH | 3.300,00€ |
| IN-7806-07 | Temperature sensor for panel | 98,00€ |
(*) Prices do not include VAT.
Pre-assembled panel on a PVC support, designed for precise regulation and control of free residual chlorine levels in water treatment plants. A compact and ready-to-install solution that ensures maximum safety and efficiency in water treatment.
Elements included
- K800 Control Center
- IN-2604-04: Cu-Pt Amperometric Sensor for Free Chlorine 0-5 ppm Self-Cleaning
- IN-2604-06: Free Chlorine Membrane Potentiostatic Sensor
- 0-2 ppm F-CL-5
- pH sensor
- Acrylic sensor holder
- Manual flow control valve
- Drain and sampling valve
- Flow sensor missing
- RS485 port with MODBUS RTU protocol
- Electrical voltage: 100...240VAC 50/60 Hz
- Sampling valve in reading cell
- 80-micron suspended solids retention filter, 5”
- Optional Temperature Probe
Deposit application
The panels are installed to obtain permanent control and regulation of free chlorine and pH levels in the tank. The control is fully automatic, and the obtained values are displayed clearly and legibly. Programming of limit values via alarms for each of the required parameters.
The panels have great programming flexibility, which allows them to be used in a wide range of operating conditions.
The controller continuously takes measurements using an appropriate probe of the element to be regulated, ordering the dosing pump via a signal to perform an injection or not, depending on the value obtained from the measurement and the limit values set by the operator.
Rest of the equipment and system components
- TPG603 Digital PVDF2 Dosing Pump
- Sodium hypochlorite level probe
- Level sensor connector
- Recirculation pump (power as a function of tank volume)
- Electrical panel
Inline chlorination system
System initial chlorination Online system for effective and precise chlorine dosing during tank filling, including a pulse counter, a high-efficiency dosing pump, a large-capacity polyethylene (PE) tank, and all necessary accessories. This system ensures adequate water treatment, thereby ensuring the quality and safety of the stored water.
Price list
| REFERENCE | MODEL – DESCRIPTION | PRICE (*) |
|---|---|---|
| CO-0402-02 | PULSE EMITTER COUNTER | 218,00€ |
| DO-2004-02 | PVDF2 DIGITAL METERING PUMP | 385,00€ |
| DE-0206-02 | DEPOSIT 120 L | 141,00€ |
(*) Prices do not include VAT.
Example for tanks up to 25,000 liters
- REF: CO-0402-02 PULSE EMITTER COUNTER 1” threaded connection - Nominal flow: 3.5 m3/h –minimum caudal: 70 L/h
- REF: DO-2004-02 PVDF2 DIGITAL METERING PUMP TPG603 Flow Rate: 5 L/h – Pressure: 10 bar
- REF: DE-0206-02 – 120 L TANK High-density polyethylene (HDPE - food grade) tank
Rest of the equipment and system components
- REF: DO-2004-50 LEVEL PROBE
- REF: DO-2004-52 LEVEL PROBE CONNECTOR
- TU-0602-07 Tubing PE 6 x 4mm translucent 2.5m
- DO-2002-50 Tank Mount Bracket
Mixed system for initial and maintenance chlorination of water in a tank
Full model. Initial inline chlorination and maintenance with chlorination and pH control panel (up to 12,000-liter tank). We advise on installation and commissioning.
Price list
| REFERENCE | MODEL – DESCRIPTION | PRICE (*) |
|---|---|---|
| IN-2604-04 | PANEL PH/CL2 – Amperometric probe (Cu-Pt) | 1.875€ |
| CO-0402-16 | PULSE COUNTER (1pulse/100) | 360€ |
| DE-0206-02 | DEPOSIT 120 L | 141€ |
| DO-2004-02 | PVDF2 DIGITAL DOSING UNIT TPG603 | 385€ |
| DO-2004-50 | LEVEL PROBE | 35€ |
| DO-2004-52 | LEVEL PROBE CONNECTOR | 5€ |
| HP-4434-01 | MCB 0.33 CV Single-Phase Pump | 268€ |
| HP-0406-01 | FRAME II 0.5HP | 175€ |
(*) Prices exclude VAT. For equipment options based on tank capacity, please call 664104354 or visit our website at contact.
Components that make it up
